P-S125 NYLATRON A-ARM BUSHING KIT ('03 RX-1)

There are 3 packages of bushings in the kit totaling 16 pieces.  

The package with 8 bushings is used for the upper a-arm, for both the inner (toward center of machine in the actual a-arm), and outer (upper bushings in the spindle housing where the a-arm bolts through). 

There are 2 packages with 4 bushings in each. The package of 4 larger bushings is used at the outer (lower) end in the spindle, where the a-arm bolts through the spindle housing.  

The package of 4 smaller bushings is used to the inside of the lower a-arm (the end toward the center of the sled). 

Remove the original bushings, if necessary do one side at a time to eliminate confusion.

Install the bushings by supporting the outer edge of the bushing (with a piece of wood or similar), and tapping in place with a hammer.

P-S126 NYLATRON A-ARM BUSHING KIT ('04 & newer RX chassis-all)

There are 3 packages of bushings in the kit totaling 16 pieces.

The package with 8 bushings is used for the upper a-arm, for both the inner (toward center of machine in the actual a-arm), and outer (upper bushings in the spindle housing where the a-arm bolts through).

There are 2 packages with 4 bushings in each. The package of 4 larger bushings is used at the outer (lower) end in the spindle housing, where the a-arm bolts through the spindle.

The package of 4 smaller bushings is used to the inside of the lower a-arm (the end toward the center of the sled).

 Remove the original bushings, if necessary do one side at a time to eliminate confusion.

Install the bushings by supporting the outer edge of the bushing (with a piece of wood or similar), and tapping in place with a hammer.

P-S131 NYLATRON A-ARM BUSHING KIT ('08 Nytro FX RTX, '08-'10 Nytro MTX 

There’s a total of 12 bushings in the kit.

The 4 smaller bushings are used in the upper a-arms.

The 8 larger bushings are used in the lower a-arms.

Remove the original bushings (it is easiest to do one side at a time so you can use the other side a reference when re-assembling.

Install the bushings by supporting the outer edge of the bushing (with a piece of wood or similar), and tapping in place with a hammer.

P-S132 NYLATRON A-ARM BUSHING KIT ('09-'10 Nytro FX RTX XTX)

There’s a total of 12 bushings in the kit.

Remove the original bushings (it is easiest to do one side at a time so you can use the other side a reference when re-assembling.

Install the bushings by supporting the outer edge of the bushing (with a piece of wood or similar), and tapping in place with a hammer.